Propeller shaft or Cardan Shaft Manufacturers offer a mechanical component for transmitting torque and rotation, usually used to connect other components of a drive train that cannot be connected directly because of distance or the need to allow for relative movement between them.
Drive shafts are carriers of torque they are subject to torsion and shear stress, equivalent to the difference between the input torque and the load. They must therefore be strong enough to bear the stress, whilst avoiding too much additional weight as that would in turn increase their inertia.Drive shafts frequently incorporate one or more universal joints or jaw couplings, and sometimes a splined joint or prismatic joint to allow for variations in the alignment and distance between the driving and driven components.
Our company is a Universal Joint Manufacturer in India offering universal joint crosses, which are known for their precise design & durability. Manufactured from qualitative raw materials, these crosses are available in various sizes and shapes, thus meeting the requirements of our clients.
These are available at most competitive prices for buyers.
Universal joint crosses are connectors used to transmit rotary motion from one shaft to another shaft that is not in line with the first, or when alignment varies during service. A coupling that allows different parts of a machine not in line with each other some freedom of movement at the same time as transmitting rotary motion.
Universal joint shaft manufacturers are used to transmit torque from one shaft to another which are offset to each other. It is an ideal form of coupling two shafts when offset is unavoidable. Spline type universal joint are made from heat treated alloy steels for increased over load and reliability. Precision machining ensures optimum performance under severe load conditions.They must therefore be strong enough to bear the stress, whilst avoiding too much additional weight as that would in turn increase their inertia.
Universal Couplings manufaturers may be connected at the ends in various ways, but it is desirable that the strength of the connection should be at least equal to the Torque of the coupling. The coupling may be keyway type or square bore Even when the driving and driven shafts are at equal angles with respect to the intermediate shaft, if these angles are greater than zero, oscillating moments are applied to the three shafts as they rotate. These tend to bend them in a direction perpendicular to the common plane of the shafts.